Post by Frank Swarner on Dec 24, 2008 19:23:33 GMT -5
This is a fly that I had tied for a trip to the Salmon River, NY which was the week after Turkey Day. It produced the most fish for me and the takes were solid to say the least.
The Brownies and the Steelies literally tore it up. The carapace feathers and one claw were ripped off and it still produced the last day we fished.
It is a nice "change up" fly to get away from the hot colors , eggs, and the flashy patterns the fish see day in day out.
I think this fly will be good for other species such as Smallmouth Bass. I also think it can be used in saltwater (striped bass) to represent a mantis shrimp or possibly a crab.
Tube: 1 1/4" long tube - diameter of 1/8" or smaller
Hook: Blackbird Sabretooth - size 4
Thread: 8/0 black
Antennae: GP tail fibers and Pea**** Sword fibers
Ribbing: Small gold or copper wire
First body: Brown dubbing
Antennae/Feelers: Whiting Bird Fur - Coachman Brown
Claws: Hen Pheasant feathers
Mid-body joint: Pea**** sword or Pea**** herl
Hackle: Hen Pheasant marabou
Ribbing: Small Gold or Copper wire
Second Body: Tan Dubbing
Carapace: 2 Hen Pheasant feathers
Step 1: Attach the thread to the tube, wrap back to the junction tubing and apply some super glue to the thread wraps.
Step 2: Strip off about 5-8 fibers from a Golden Pheasant tail. Tie them on top of the tube wraight at the junction tubing.
Step 3: Strip of about 4-6 fibers from a Pea**** Sword and tie them on top of the GP tail fibers.
Step 4: Snip of a 3"-4" piece of small gold wire and attach it to the far side of the hook shank.
Step 5: Spin some brown dubbing onto your thread and wrap the first body. Stop just shy of the midpoint.
Step 6: Rib the body with the small gold wire. Tie off and trim excess.
Step 7: Pick out 2 small to medium sized feathers from a Whiting Bird Fur neck. Don't strip off any fibers and tie them onto the sides of the tube. The fluffier filoplume should extend to the tip of the Pea**** Sword but not any further.
Step 8: Select two, nicely mottled, Hen Pheasant feathers and tie them onto the sides of the tube right where the bird fur is tied. These will be the claws and they should extend just past the Pea**** Sword fibers. Tie everything on good and tight, then trim the excess.
Step 9: Select a few fibers from a Pea**** Sword or use a few Pea**** herls instead. Tie them in at the mid-body point and wrap them to make a small joint between body sections. Tie off and trim excess.
Step 10: Select a fluffy marabou like feather from a Hen Pheasant. The stem should be long enough to make 3-4 turns. Strip off the fibers on the lower half and tie the feather in by the butt.
Step 11: Snip of a 3"-4" piece of small gold wire and attach it to the far side of the hook shank.
Step 12: Spin some tan dubbing onto your thread and wrap the second body.
Step 13: Rib the second body with 3-4 turns of gold wire. Tie off and trim excess.
Step 14: Wrap the Hen Pheasant marabou feather forward, keeping each turn on the rear edge of the wire. Tie off and trim excess.
Step 15: Trim off the hackles on top of the tube where the carapace will be located.
Step 16: Select 2 Hen pheasant feathers for the carapace. One should be lightly colored and mottled, the other should be dark and mottled. Strip off the fibers from the base of the stem so the lightly colored feather extends to the base of the antennae. The darker feather should be slightly shorter.
Step 17: Hold the feathers one on top of the other and tie them in at the same time, on top of the hook shank. Trim off excess and finish the head.
Step 18: Melt the tip of the tube with a lighter to finish the fly and apply head cement to the thread.
The Brownies and the Steelies literally tore it up. The carapace feathers and one claw were ripped off and it still produced the last day we fished.
It is a nice "change up" fly to get away from the hot colors , eggs, and the flashy patterns the fish see day in day out.
I think this fly will be good for other species such as Smallmouth Bass. I also think it can be used in saltwater (striped bass) to represent a mantis shrimp or possibly a crab.
Tube: 1 1/4" long tube - diameter of 1/8" or smaller
Hook: Blackbird Sabretooth - size 4
Thread: 8/0 black
Antennae: GP tail fibers and Pea**** Sword fibers
Ribbing: Small gold or copper wire
First body: Brown dubbing
Antennae/Feelers: Whiting Bird Fur - Coachman Brown
Claws: Hen Pheasant feathers
Mid-body joint: Pea**** sword or Pea**** herl
Hackle: Hen Pheasant marabou
Ribbing: Small Gold or Copper wire
Second Body: Tan Dubbing
Carapace: 2 Hen Pheasant feathers
Step 1: Attach the thread to the tube, wrap back to the junction tubing and apply some super glue to the thread wraps.
Step 2: Strip off about 5-8 fibers from a Golden Pheasant tail. Tie them on top of the tube wraight at the junction tubing.
Step 3: Strip of about 4-6 fibers from a Pea**** Sword and tie them on top of the GP tail fibers.
Step 4: Snip of a 3"-4" piece of small gold wire and attach it to the far side of the hook shank.
Step 5: Spin some brown dubbing onto your thread and wrap the first body. Stop just shy of the midpoint.
Step 6: Rib the body with the small gold wire. Tie off and trim excess.
Step 7: Pick out 2 small to medium sized feathers from a Whiting Bird Fur neck. Don't strip off any fibers and tie them onto the sides of the tube. The fluffier filoplume should extend to the tip of the Pea**** Sword but not any further.
Step 8: Select two, nicely mottled, Hen Pheasant feathers and tie them onto the sides of the tube right where the bird fur is tied. These will be the claws and they should extend just past the Pea**** Sword fibers. Tie everything on good and tight, then trim the excess.
Step 9: Select a few fibers from a Pea**** Sword or use a few Pea**** herls instead. Tie them in at the mid-body point and wrap them to make a small joint between body sections. Tie off and trim excess.
Step 10: Select a fluffy marabou like feather from a Hen Pheasant. The stem should be long enough to make 3-4 turns. Strip off the fibers on the lower half and tie the feather in by the butt.
Step 11: Snip of a 3"-4" piece of small gold wire and attach it to the far side of the hook shank.
Step 12: Spin some tan dubbing onto your thread and wrap the second body.
Step 13: Rib the second body with 3-4 turns of gold wire. Tie off and trim excess.
Step 14: Wrap the Hen Pheasant marabou feather forward, keeping each turn on the rear edge of the wire. Tie off and trim excess.
Step 15: Trim off the hackles on top of the tube where the carapace will be located.
Step 16: Select 2 Hen pheasant feathers for the carapace. One should be lightly colored and mottled, the other should be dark and mottled. Strip off the fibers from the base of the stem so the lightly colored feather extends to the base of the antennae. The darker feather should be slightly shorter.
Step 17: Hold the feathers one on top of the other and tie them in at the same time, on top of the hook shank. Trim off excess and finish the head.
Step 18: Melt the tip of the tube with a lighter to finish the fly and apply head cement to the thread.