|
|
Post by whatsajob614 on Sept 26, 2009 20:25:00 GMT -5
|
|
|
|
Post by Frank Swarner on Sept 27, 2009 12:45:37 GMT -5
They look great!!! Not sure if you do this or not........melt the tube when you are done tying the head.....leave about an 1/8" sticking out and melt it back to form a bump that will stop the thread head from un-wravelling off the tip.
|
|
|
|
Post by whatsajob614 on Sept 27, 2009 13:38:21 GMT -5
Thank you very much sir. I melted every one of them, except, I do it before hand. Probably hard to see on some of the pics. You pretty much have the size you want down pat to do it this way. Also, some are tied on the liner tube, actually in front of the metal tube. That way. you can leave the back end of the liner long, and trim it at the end of the tie before attaching junction tubing. (which I found out works better slid over the liner, than over the metal tubes, which makes a hump like in pic 7)
|
|
